| 质量保证措施 |
| 添加时间：2021/8/30 16:42:55 浏览次数： |
质量保证措施
1、模板的接缝不应漏浆；在浇筑混凝土前，木模板应浇水湿润，但模板内不应有积水。1. The joints of the formwork shall not leak mortar; before pouring concrete, the wood formwork shall be watered and wetted, but there shall be no water in the formwork. 2、模板与混凝土的接触白钢雕塑 小型滚揉机 防火电缆 托辊设备 水刀切割机 铜钟 石雕狮子 校园不锈钢雕塑 扭王块模具面应清理干净并涂刷隔离剂。 2. The contact surface between the formwork and the concrete shall be cleaned and painted with the isolating agent. 3、柱、墙模板底部设置清扫、检查口，有利于清理及检查柱、墙内垃圾杂物，保证柱、墙根部混凝土的质量。 3. Cleaning and inspection openings shall be set at the bottom of column and wall formwork to facilitate the cleaning and inspection of garbage and sundries in column and wall and ensure the quality of concrete at the bottom of column and wall |
| 上一页 硅橡胶模具制作方法及注意事项 |
| 下一页 质量保证措施 |